Bringing an Interstate Car to WA? How to Pass the Vehicle Inspection First Time 

Interstate Car Inspections in WA pass first time

Table of Contents

You have landed a job in the Pilbara, packed the car and driven across from another state. Now it needs WA plates, and that means passing a vehicle inspection in WA first. Online advice ranges from “it’s easy” to stories of cars failed for a wiper blade. 

Here is how the process actually works, what tends to trip people up, and how to get the car ready so inspection day is a formality. 

Why your interstate car needs a vehicle inspection in WA 

WA licenses vehicles under its own process. According to the Department of Transport and Major Infrastructure (DTMI), a car licensed in another state must be inspected at an Authorised Inspection Station (AIS) before it can be licensed in WA. 

It does not matter that the car passed a safety check or was registered without fuss interstate. A vehicle being licensed here for the first time needs a WA inspection. DTMI also notes you can only license a vehicle in WA if it is primarily kept here, which is the case once you have moved. 

How the process works, step by step 

According to DTMI’s own pages, there are three stages. 

Book an Authorised Inspection Station 

AISs are private businesses authorised by DTMI to carry out inspections. You book and pay directly with the AIS you choose, and opening hours vary, so you may need to call more than one. DTMI’s online “find a location” tool lists the stations near you. 

Before you book, DTMI says to check whether your car has an open compulsory Takata airbag recall. A vehicle with a defective Takata airbag cannot be inspected until it is fixed. 

Inspection day 

DTMI asks you to arrive 15 minutes early and give 24 hours’ notice to cancel or reschedule. If the car passes, you receive a Certificate of Inspection, which is valid for three months. 

If it fails, you fix the faults and book a re-inspection with the AIS, quoting your original inspection reference number. A re-inspection fee applies. 

Licensing at DTMI 

Within those three months, take your application to a DTMI service centre or regional agent in person. For an interstate vehicle, DTMI says a third party cannot lodge it for you. You will need: 

  • your valid Certificate of Inspection 
  • a completed Application to License a Vehicle (Form VL17) 
  • Form VL186 if you have never licensed a vehicle in WA and do not hold a WA driver’s licence 
  • one primary and one secondary form of ID 
  • proof of ownership 
  • your interstate plates, as you may need to hand them in 


Vehicle licence duty may also apply unless you were the previous licence holder. 

What fails cars most often (and the cheap fixes) 

DTMI lists the key areas an inspection checks: 

  • body work, chassis and suspension 
  • brakes and steering 
  • drive line and electrical 
  • tyres and rims 
  • vehicle identification 
  • vehicle modifications and compliance with vehicle standards 


DTMI doesn’t publish a list of the most common fail items, but drivers who have been through it tend to report the same small things. None of the items below are ranked, and most are quick to fix before the day. 

One requirement catches some interstate cars out: DTMI says every vehicle in WA must be fitted with a government-approved immobiliser. If your car came from a state with different rules, check this early. 

Tyres and rims 

Worn tread, uneven wear, cuts in the sidewall or mismatched tyres are among the things people report. A long drive across the country is hard on tyres, so check them once you arrive. Our tyres and wheel alignments service covers replacement and alignment, and it’s worth reading what every FIFO worker should check on their tyres. 

Lights, wipers and windscreen 

Blown globes, worn wiper blades and windscreen damage come up often in drivers’ stories. They are small items, but each one is a reason for a re-inspection. Walk around the car with the lights on and test every globe, including the number plate light. 

Brakes, steering and suspension 

Worn pads, leaking shocks, loose steering components and perished bushings are the sort of faults an inspector will pick up underneath. If anything feels soft, noisy or vague, get it looked at first. We handle brake repairs in Karratha and steering and suspension services in the same workshop. 

Modifications on 4WDs and utes 

Lifted suspension, larger tyres, bull bars and other accessories are all part of the inspection. Some lifts and tyre-size changes need DTMI approval, and the rules depend on how much the vehicle has changed. Check DTMI’s “Modify or construct a vehicle” pages before booking, and keep paperwork for any modification work. For a sense of how red dirt roads treat a lifted vehicle once you’re here, see what Karratha’s red dirt roads do to 4WD suspension. 

Why a pre-inspection check is worth doing 

A failed inspection costs you a re-inspection fee, another booking and more time off work. A pre-inspection check is about avoiding that. 

We do not carry out the WA inspection ourselves; that is done at an AIS. What we do is get the car ready for it: 

  • check the areas DTMI lists, from tyres and lights to brakes and steering 
  • find the small faults people commonly report, such as worn wipers or a blown globe 
  • quote and fix any defects before you book, with your go-ahead 
  • tell you if a modification looks like it needs DTMI approval, so you can sort it first 


We can combine it with a pre-inspection service and safety check, so the car is serviced and ready in one visit. 

Moving to Karratha with your car: the local timing 

Most people relocating for mining, gas or construction roles start on a roster soon after they arrive. Once the swings begin, finding a free weekday for a workshop, an inspection and a trip to DTMI gets harder. 

A simple order of play: 

  1. Book the pre-inspection check in your first week. 
  1. Use DTMI’s location tool to find the nearest AIS and book it for after the fixes are done. 
  1. Lodge your licence application in person at a DTMI service centre or regional agent within three months of passing. 


If you drove across, remember the trip itself may have worn the tyres and brakes more than you realise. 

Interstate inspection FAQ 

My car passed a safety check in another state. Why does it need inspecting again? WA licenses vehicles under its own process. A vehicle being licensed here for the first time needs a WA inspection, whatever happened interstate. 

Will they fail my car for something small? They can. The inspection checks the vehicle against roadworthiness standards, so small items like worn wipers, a blown globe or a damaged tyre can fail it. A pre-inspection check catches those before you pay for the inspection. 

How long do I have once the inspection is done? DTMI says inspection certificates are valid for three months, so license the vehicle within that time. 

My 4WD is lifted. Will that be a problem? Possibly. Modifications are part of the inspection, and some lifts and tyre-size changes need approval. Check DTMI’s modification rules, or ask us to look at the vehicle first. 

Tips for a first-time pass 

  • Book the pre-inspection check for your first week; once rosters start, finding a free day is harder. 
  • Fix chips and cracks in the windscreen early. Heat and corrugations spread them, and a crack in the driver’s line of sight is a fail risk. 
  • Keep receipts for any modification work. They help when the inspector asks what has been changed. 
  • Check for open Takata airbag recalls before you book the AIS. 
  • Bring your interstate plates and ID when you go to DTMI to license the car. 

Book a pre-inspection check in Karratha 

New to town with a car on interstate plates? Route 1 Mechanical is at 3/1010 Coolawanyah Road in the Karratha Industrial Estate. Call 08 5106 7668 or book online for a pre-inspection check, and we’ll get the car ready and fix any defects before you head to the AIS. Ask for a quote when you book. 

Picture of Route 1 Mechanical

Route 1 Mechanical

Share this article

Have a Question?

Feel free to discuss with one of our friendly team member.